AC Servo Motor & Digital Drive Combo - 400W, 110VAC

SKU

servo-motor-drive-combo-b

Buy 10 for $1,500.00 each and save 3%

Product Details

AC servo motor, digital servo drive, and cabling all in one simple package.

J0400-301-4-000

A high performance brushless AC servo motor with a standard configuration that includes high-resolution, incremental encoder feedback. This motor is UL Recognized in the US and Canada, file no. E472271.

Motor Features:

High torque density
Low rotor inertia
Compact size
High-resolution, incremental encoders (2500 lines, 10000 counts)
IP65 rated for harsh environments
Motor cable length is 300mm; a 3 meter cable option is available
Frame Size: 60 mm
Continuous Torque: 11.23 in-lb
Peak Torque: 33.63 in-lb
Rated Voltage: 120 VAC
Rated Power: 400 watts
Rated Speed: 3000 rpm
Peak Speed: 6000 rpm
Rated Current: 5.7 A rms

Peak Current: 17.1 A rms
Torque Constant: 1.96 in-lb/A
Voltage Constant: 13.8 V/krpm
Armature Resistance: 0.85 Line-to-Line ohms
Armature Inductance: 2.9 Line-to-Line mH
Motor Length: 4.68 inch
Rotor Inertia: 3.85E-03 oz-in-sec2
Weight: 3.1 lbs
Integral Holding Brake: No
Storage Temperature: -20 to 80 °C
Operating Temperature: 0 to 40 °C
Insulation Class: Class B (130 ºC)
Shaft Diameter: 14 mm (0.551 inch)
Maximum Radial Load: 54 lbs
Maximum Thrust Load: 15.7 lbs

Drawing

SV2A5-Q-DE

The SV200 series digital servo drives offer excellent performance at exceptional value. They provide short settling times of 0 to 2 milliseconds. Auto-tuning enables the system to optimize tuning parameters automatically and greatly reduces setup time. The anti-vibration function reduces and often eliminates vibrations arising from the natural mechanical characteristics of the load.

The SV2A5-Q-DE servo drive is suited for stand-alone operation, utilizing its built-in motion controller. The drive is programmed using the Q Programmer software (included in SVx Servo Suite) which provides powerful commands for motion, I/O, logic, multitasking and more. Motion commands include relative and absolute positioning, homing, jogging, encoder following, analog positioning, segmented moves and more.

The SVX Servo Suite software allows for easy setup and programming of the drive and motor. It has a built-in oscilloscope for testing motion and optimizing motor performance. The SV2A5-Q-DE is UL Recognized (File No. E332730), CE approved, and RoHS compliant.

Drive Features:

Supply Voltage: 78-139 VAC
Supply Voltage Type: AC
Control Modes:
- Streaming Commands
- Analog Positioning
- Encoder Following
- Q Programming
- Modbus TCP
Output Current, Continuous: 5.4
Output Current, Peak: 13.5
Communication Ports:
- Ethernet
- Ethernet, dual-port
Feedback: Halls + Incremental encoder
Setup Method: Software setup

Digital Inputs: 8 general purpose, 4 high speed
Digital Outputs: 6
Analog Inputs: 2
Dimensions: 6.9 x 2.6 x 5.9 inches
Weight: 57.6 oz
Operating Temperature Range: 0 to 85 °C
Ambient Temperature Range: 0 to 40 °C
Ambient Humidity:
20 to 85% RH or less
Status LEDs: 5 digit, 7 segment display
Circuit Protection:
- Short circuit
- Over-voltage
- Under-voltage
- Over-temp

Datasheet

3004-300 - Servo Motor Power Cable (for SV200 AC, SVAC3, SV7, and BLuDC drives)

The 3004-300 cable connects the motor power leads of a J Series servo motor to the corresponding connections of the following Applied Motion servo drives:

All SV200 series servo drives
All SVAC3 series servo drives
All SV7 series servo drives
All BLuDC4 and BLuDC9 servo drives

3004-304 - Servo Feedback Cable (for SV200 drives)

The 3004-304 cable connects the motor power leads of a J Series servo motor to the corresponding connections of an Applied Motion SV200 Series servo drive.