AC Servo Motor & Digital Drive Combo - 400W, 48VDC

SKU

servo-motor-drive-combo

Buy 10 for $1,123.00 each and save 3%

Product Details

AC servo motor, digital servo drive, and cabling all in one simple package.

J0400-304-4-000

A high performance brushless AC servo motor with a standard configuration that includes high-resolution, incremental encoder feedback. This motor is UL Recognized in the US and Canada, file no. E472271.

Motor Features:

Frame Size: 60 mm
Continuous Torque: 11.24 in-lb
Peak Torque: 33.63 in-lb
Rated Voltage: 48 VDC
Rated Power: 400 watts
Rated Speed: 3000 rpm
Peak Speed: 6000 rpm
Rated Current: 12 A rms
Peak Current: 36 A rms
Torque Constant: 0.91 in-lb/A
Voltage Constant: 6.3 V/krpm
Armature Resistance: 0.188 Line-to-Line ohms

Armature Inductance: 0.6 Line-to-Line mH
Motor Length: 4.65 inch
Rotor Inertia: 3.85E-03 oz-in-sec2
Weight: 3.1 lbs
Integral Holding Brake: No
Storage Temperature: -20 to 80 °C
Operating Temperature: 0 to 40 °C
Insulation Class: Class B (130 ºC)
Shaft Diameter: 14 mm (0.551 inch)
Maximum Radial Load: 54 lbs
Maximum Thrust Load: 15.7 lbs

Drawing

SV2D10-Q-DE

The SV200 series digital servo drives offer excellent performance at exceptional value. They provide short settling times of 0 to 2 milliseconds. Auto-tuning enables the system to optimize tuning parameters automatically and greatly reduces setup time. The anti-vibration function reduces and often eliminates vibrations arising from the natural mechanical characteristics of the load.

The SV2D10-Q-DE servo drive is suited for stand-alone operation, utilizing its built-in motion controller. The drive is programmed using the Q Programmer software (included in SVx Servo Suite) which provides powerful commands for motion, I/O, logic, multitasking and more. Motion commands include relative and absolute positioning, homing, jogging, encoder following, analog positioning, segmented moves and more.

The SVX Servo Suite software allows for easy setup and programming of the drive and motor. It has a built-in oscilloscope for testing motion and optimizing motor performance.

Drive Features:

Digital servo drive
Auto-tuning
Anti-vibration function
24-60VDC input power, 50/60 Hz
12A continuous, 30A peak output current
On-board motion controller with Q Programming
8 regular digital inputs, 5-24 VDC
4 high-speed digital inputs, 5-24 VDC
6 digital outputs, 30 VDC max
2 analog inputs, -10 to +10 V
Fault protection
High torque density
Low rotor inertia
Compact size
High-resolution, incremental encoders (2500 lines, 10000 counts)

IP65 rated for harsh environments
Supply Voltage: 24-60VDC
Supply Voltage Type: DC
Control Modes: Streaming Commands, Analog Positioning, Encoder Following, Q Programming, Modbus TCP
Communication Ports: Ethernet, Ethernet, dual-port
Feedback: Halls + Incremental encoder
Setup Method: Software setup
Dimensions: 5.9 x 1.6 x 3.82 inches
Operating Temperature Range: 0-85 °C
Ambient Temperature Range: 0-50 °C
Ambient Humidity: 20 to 85% RH or less
Status LEDs: 5 digit, 7 segment display
Circuit Protection: Short circuit, Over-voltage, Under-voltage, Over-temp

Datasheet

3004-355 - Optional 3 meter Servo Motor Power Cable, more than 6A (SV200 drives)

The 3004-355 cable connects the motor power leads of a J Series servo motor with rated current of more than 6 amps to the corresponding connections on DC-powered SV200 servo drives.

Compatible with J Series servo motors with more than 6A rated current
Compatible with SV2Dx servo drives
AMP plastic connector on motor end
Flying leads on drive end

3004-304 - Optional 3 meter Servo Feedback Cable (for SV200 drives)

The 3004-304 cable connects the motor power leads of a J Series servo motor to the corresponding connections of an Applied Motion SV200 Series servo drive.