Servo Drives

Servo Drives and servo amplifiers transform a low power command signal from a motion controller into high power current/voltage applied to the servo motor windings to produce torque. A servo motor drive utilizes internal feedback loops for precise control of motor current and may also control velocity.

The terms servo drive and servo amplifier are interchangeable. Digital drives contain some form of processing capability, typically a Digital Signal Processor (DSP).


Servo Drive Types:

Analog amplifiers or drives have little to no processing capability and perform all the drive functionality strictly in the analog domain. Due to the additional intelligence available on digital drives, they have more functionality, diagnosis capabilities, and easier configuration compared to analog drives.

Intelligent Drives/Smart Drives are drives that combine a portion, or all, of the motion controller functionality with the high power electronics of a motor drive. Smart drives vary with the amount of control functionality and type of communication interface. There are generally two types: fieldbus based and deterministic bus based. 

Fieldbus based intelligent drives contain all the components of a motion controller and are communicated to via a serial port or a fieldbus network. They are typically used for non-coordinated motion control applications.  Electromate® offers a variety of network options for connecting servo drives in a multi-axis configuration. Choosing the right network depends on a variety of factors such as required bandwidth, update rate, performance, and cost. Currently supported network options are:  CANopen, EtherCAT®, RS232, RS485, DeviceNet, Profibus, Ethernet/IP, PROFINET, Modbus TCP/IP and SynqNet.

Deterministic bus based intelligent drives typically incorporate the interpolation and control loop into the drive but rely on a motion controller to perform the trajectory generation. The benefits of either intelligent drive topology include all digital communication, detailed diagnostics, reduced cabling, high axes count and short wiring distance between the drive and motor.

Servo drives are used in applications such as robotics, CNC machinery or automated manufacturing. As a servo drives supplier, Electromate supplies industrial servo drives throughout Canada.


Servo Drive We Provide:

Motor Controllers for Electric Vehicles

Fully functional, four-quadrant servo drives designed and built to operate today's modern mobile electric vehicular platforms. Providing high power from battery supplies with multiple operating modes, for either permanent magnet brushed or brushless motors, propels this motor controlling series ahead of all others. Whether for traction / propulsion, steering,


Analog Type Amplifiers

Provides unparalleled benefits in both simplicity and performance. Drive setup and operation is more straightforward than digital drives, while achieving higher bandwidth and faster response times at a lower cost. Analog drive technology has been a staple of servo system solutions since day one, and our years of experience in building the highest quality products has created a solid and continuously improving selection of analog drives.


Digital Type Amplifiers

Provide a wide range of options for servo system solutions. Supports an array of feedback options. Driving single phase, three phase, and closed loop vector motors with the ability to interface with both digital network commands and traditional ±10V analog commands, DP drives offer a versatile blend of cutting edge technology and proven results.


CANopen Amplifiers

CANopen is a robust serial protocol that is low cost and offers enhanced diagnostic and control capabilities with reasonable bandwidth. The average CAN message is 130 bits, so it takes 130μsec per message per node to physically send out a message. Different CAN message types improve on this time, but update rates close to 1KHz are possible.


EtherCAT Amplifiers

EtherCAT is a high-performance Ethernet based deterministic network protocol developed by Beckhoff. EtherCAT is based off 100BaseT physical layer and can send multiple datagrams per EtherCAT packet. Cycle times can reach lower than 1msec.


Extended Environment Amplifiers

Designed to operate under harsh thermal and mechanical extremes. An expanded thermal operating range allows these drives to function in both hot and cold ambient environments, and enhanced protection against shock and vibration provides additional system ruggedness. Extended Environment drives also afford benefits for applications in more docile conditions.


POWERLINK / Modbus TCP / Ethernet Amplifiers

An open standard fieldbus for real-time Ethernet-based motion control created by B&R (Bernecker+Rainer Industrie-Elektronik) designed to give users a single, consistent, and integrated means for handling all communication tasks in modern automation. A POWERLINK network integrates all automation components such as PLCs, sensors, I/O modules, motion controllers, safety controls, and HMI systems.


SynqNet Amplifiers

Feature an all-digital motion control interface built on IEEE 802.3 standards for 100baseT, the physical layer of Ethernet. High communication rates allow this centralized control network to coordinate up to 32 nodes.


Positioning and Speed Controllers for Micro Motors

When more than just speed and torque control is required and recurring positioning processes with complex trajectories have to be executed, use Maxon positioning controllers. Maxon position controllers feature CANopen or EtherCAT connectivity, so setting up a distributed control network is easy. All Maxon Motor speed and position controls are specially designed for DC and EC motors with encoders up to 750 Watt continuous output power.


Items 61-90 of 303

per page
Set Descending Direction
  1. This servo drive offers 10-80 VDCput; 30A continuous / 60A peak | 2.3kW Output @ 80 VDC in capability.
    AZBDC60A8

    10-80 VDCput; 30A continuous / 60A peak | 2.3kW Output @ 80 VDC

    $468.00
  2. This PWM servo drive offers 20-80 VDCput; 3A continuous / 6A peak | 0.2kW Output @ 80 VDC.
    AZBDC6A8

    20-80 VDCput; 3A continuous / 6A peak | 0.2kW Output @ 80 VDC

    $219.00
  3. Enjoy 40-175 VDCput; 6A continuous / 10A peak | 1kW Output @ 175 VDC
 from this PWM servo drive.
    AZBE10A20

    40-175 VDCput; 6A continuous / 10A peak | 1kW Output @ 175 VDC

  4. The AZBD10A4 is fully protected against over-voltage, under-voltage, over-current, over-heating, and short-circuits. A single digital output indicates operating status.
    AZBE10A4

    10-36 VDC Input, 5 A Cont. (10 Peak)

    $207.00
  5. The AZBE10A4IC interface card and PWM servo drive assembly is designed to drive brushless and brushed DC motors at a high switching frequency.
    AZBE10A4IC

    10-36 VDC Input, 5 A Cont. (10 Peak)

  6. This servo drive offers 20-80 VDCput; 6A continuous / 12A peak | 0.5kW Output @ 80 VDC in capability.
    AZBE12A8

    20-80 VDCput; 6A continuous / 12A peak | 0.5kW Output @ 80 VDC

    $260.00
  7. Enjoy 10-80 VDCput; 12A continuous / 20A peak | 0.9kW Output @ 80 VDC capability from this servo drive.
    AZBE20A8

    10-80 VDCput; 12A continuous / 20A peak | 0.9kW Output @ 80 VDC

    $331.00
  8. AZBE25A20 Amplifiers Analog Type Advanced Motion Controls
    AZBE25A20

    40-175 VDC Input, 12.5 A Cont. (25 Peak)

    $444.00
  9. This unit offers 10-80 VDC Input, 20 A Cont. (40 Peak).
    AZBE40A8

    10-80 VDC Input, 20 A Cont. (40 Peak)

    $414.00
  10. AZBE60A8 Amplifiers Analog Type Advanced Motion Controls
    AZBE60A8

    10-80 VDCput; 30A continuous / 60A peak | 2.3kW Output @ 80 VDC

    $491.00
  11. AZBE6A8 Amplifiers Analog Type Advanced Motion Controls
    AZBE6A8

    20-80 VDCput; 3A continuous / 6A peak | 0.2kW Output @ 80 VDC

    $248.00
  12. This PWM servo drive offers 40-175 VDCput; 6A continuous / 10A peak | 1kW Output @ 175 VDC.
    AZBH10A20

    40-175 VDCput; 6A continuous / 10A peak | 1kW Output @ 175 VDC

  13. AZBH10A4 Amplifiers Analog Type Advanced Motion Controls
    AZBH10A4

    10-36 VDCput; 5A continuous / 10A peak | 0.2 Output @ 36 VDC

    $201.00
  14. AZBH10A4IC Amplifiers Analog Type Advanced Motion Controls
    AZBH10A4IC

    10-36 VDCput; 5A continuous / 10A peak | 0.2 Output @ 36 VDC

  15. AZBH12A8 Amplifiers Analog Type Advanced Motion Controls
    AZBH12A8

    20-80 VDCput; 6A continuous / 12A peak | 0.5kW Output @ 80 VDC

    $255.00
  16. AZBH20A8 Amplifiers Analog Type Advanced Motion Controls
    AZBH20A8

    10-80 VDCput; 12A continuous / 20A peak | 0.9kW Output @ 80 VDC

    $326.00
  17. AZBH25A20 Amplifiers Analog Type Advanced Motion Controls
    AZBH25A20

    40-175 VDCput; 12.5A continuous / 25A peak | 2.1kW Output @ 175 VDC

    $438.00
  18. The AZBH40A8 servo drive is designed to drive brushless and brushed DC motors at a high switching frequency.
    AZBH40A8

    10-80 VDC Input, 20 A Cont. (40 Peak)

    $409.00
  19. The AZBH60A8 servo drive is designed to drive brushlessand brushed DC motors at a high switching frequency.
    AZBH60A8

    10-80 VDCput; 30A continuous / 60A peak | 2.3kW Output @ 80 VDC

    $479.00
  20. Benefit from this servo drive that offers 20-80 VDCput; 3A continuous / 6A peak | 0.2kW Output @ 80 VDC.
    AZBH6A8

    20-80 VDCput; 3A continuous / 6A peak | 0.2kW Output @ 80 VDC

    $243.00
  21. AZXB15A8 Amplifiers Extended Environment Advanced Motion Controls
    AZXB15A8

    10-80 VDCput; 7.5A continuous / 15A peak | 0.6kW Output @ 80 VDC

    $479.00
  22. AZXB8A8 Amplifiers Extended Environment Advanced Motion Controls
    AZXB8A8

    10-80 VDCput; 4A continuous / 8A peak | 0.3kW Output @ 80 VDC

    $409.00
  23. AZXBDC15A8 Amplifiers Extended Environment Advanced Motion Controls
    AZXBDC15A8

    10-80 VDCput; 7.5A continuous / 15A peak | 0.6kW Output @ 80 VDC

    $503.00
  24. AZXBDC25A8 Amplifiers Extended Environment Advanced Motion Controls
    AZXBDC25A8

    10-80 VDCput; 12.5A continuous / 25A peak | 1.0kW Output @ 80 VDC

    $586.00
  25. AZXBDC40A8 Amplifiers Extended Environment Advanced Motion Controls
    AZXBDC40A8

    10-80 VDCput; 20A continuous / 40A peak | 1.5kW Output @ 80 VDC

    $645.00
  26. AZXBDC8A8 Amplifiers Extended Environment Advanced Motion Controls
    AZXBDC8A8

    10-80 VDCput; 4A continuous / 8A peak | 0.3kW Output @ 80 VDC

    $432.00
  27. AZXBE15A8 Amplifiers Extended Environment Advanced Motion Controls
    AZXBE15A8

    10-80 VDCput; 7.5A continuous / 15A peak | 0.6kW Output @ 80 VDC

    $544.00
  28. AZXBE25A8 Amplifiers Extended Environment Advanced Motion Controls
    AZXBE25A8

    10-80 VDCput; 12.5A continuous / 25A peak | 1kW Output @ 80 VDC

    $615.00
  29. This servo drive requires only a single unregulated isolated DC power supply, and is fully RoHS II compliant.
    AZXBE40A8

    10-80 VDC Input, 20 A Cont. (40 Peak)

    $710.00
  30. AZXBE8A8 Amplifiers Extended Environment Advanced Motion Controls
    AZXBE8A8

    10-80 VDCput; 4A continuous / 8A peak | 0.3kW Output @ 80 VDC

    $473.00

Items 61-90 of 303

per page
Set Descending Direction