Analog Type Amplifiers

Advanced Motion Controls' family of brush & brushless Analog Servo Drives & Motors provides unparalleled benefits in both simplicity and performance. Drive setup and operation is more straightforward than digital drives, while achieving higher bandwidth and faster response times at a lower cost. Analog drive technology has been a staple of servo system solutions since day one, and our years of experience in building the highest quality products has created a solid and continuously improving selection of analog drives. A variety of command options, including ±10V analog, PWM and Direction, dual Sine wave, and specialized electric vehicle commands make the Advanced Motion Controls' family of brush & brushless analog servo drives your best choice for proven servo solutions. 

All AMC's Analog Servo Drives feature:

  • Built-in hardware protection – Over Current, Over Voltage, Over Temperature, Short Circuit
  • DIP Switches and Potentiometers for loop tuning, current limit adjustments, and drive configuration
  • Standard models for both brushed and brushless motor varieties
  • Velocity feedback provided by incremental encoder, Hall Sensors, or tachometer
  • Analog Position Loop control available
  • Optical Isolation between high and low power signals standard on most models
  • Current, Velocity, and Fault Monitor analog output signals
  • Status LEDs for power and drive status
    • Standard models in both Panel Mount, PCB Mount (Z-Drives), and Vehicle Mount (M/V™ Series Motor Controllers)
    • Four quadrant regenerative operation
    • Extended Environment versions available (AZX series Z-Drives)

µZ Plug-In Drives

µZ’s are the smallest off-the-shelf servo drives from ADVANCED Motion Controls.  Pronounced ‘Micro-Z’ these plug-in drives are designed for embedded applications in a wide range of industries including: Robotics, Lab Automation, Homeland Security/Military, Electric Mobility, Medical and Packaging.

µZ servo drives are designed to drive brushless and brushed DC motors at a high switching frequency.  To increase system reliability and to reduce cabling costs, the drives are designed for direct integration into your PCB.  Weighing in at less than 9 grams, µZ Drives output 10A peak and 5A continuous and operate with a bus voltage range of 10-36VDC.

Designed without the need for a heatsink, the µZ’s are true featherweights with a high power to weight ratio.  The µZ’s are fully protected against over-voltage, under-voltage, over-current, over-heating, and short-circuits. Depending on the model, the drives interface with digital controllers that have analog ±10V or PWM/Direction commands. These servo drives require only a single unregulated isolated DC power supply, and are fully RoHS (Reduction of Hazardous Substances) compliant.

Features:

  • Designed for direct board-to-board integration.AMC UZ Graphic
  • No heatsink and no need for additional heatsinking results in the smallest installed volume
  • No heatsink and no need for additional heatsinking results in the smallest installed volume
  • Feather weight, less than 9 grams
  • Dimensions (mm) 38.1 x 38.1 x 7.34 for current mode models, 43.2 x 38.1 x 9.4 for velocity / duty cycle models
  • Dimensions (in) 1.50 x 1.50 x 0.29 for current mode models, 1.70 x 1.50 x 0.37 for velocity / duty cycle models
  • Large operational temperature range, 0-85°C
  • Compatible with low inductance motors
  • Smallest form factor of any off-the-shelf servo drive from ADVANCED Motion Controls
  • 40 kHz switching frequency
 

Resources

  • AZB10A4 for ±10V Command Signals, Current Mode
  • AZBH10A4 for ±10V Command Signals, Hall Velocity Mode
  • AZBE10A4 for ±10V Command Signals, Encoder Velocity Mode
  • AZBD10A4 for ±10V Command Signals, Duty Cycle Mode
  • AZBDC10A4 for PWM/Direction Command Signals

Stand-alone (drives with built-in interface)

  • AZB10A4IC for ±10V Command Signals, Current Mode
  • AZBDC10A4IC for PWM/Direction Command Signals
  • AZBE10A4IC for ±10V Command Signals, Encoder Velocity Mode
  • AZBH10A4IC for ±10V Command Signals, Hall Velocity Mode
  • AZBD10A4IC for ±10V Command Signals, Duty Cycle Mode

Products

Items 1-30 of 82

Page
per page
Set Descending Direction
  1. The 100A40 PWM servo drive is designed to drive brush type DC motors at a high switching frequency.
    100A40

    80-400 VDCput; 50A continuous / 100A peak | 19kW Output @ 400 VDC

    $2,133.00
  2. 120A10 Amplifiers Analog Type Advanced Motion Controls
    120A10

    20-80 VDCput; 60A continuous / 120A peak | 4.6kW Output @ 80 VDC

    $1,035.00
  3. A12A100 Amplifiers Analog Type Advanced Motion Controls
    A12A100

    20-80 VDC Input, 6 A Cont. (12 Peak)

  4. A20A200 Amplifiers Analog Type Advanced Motion Controls
    A20A200

    40-175 VDC Input, 12 A Cont. (20 Peak)

  5. A25A200 Amplifiers Analog Type Advanced Motion Controls
    A25A200

    40-175 VDC Input, 12.5 A Cont. (25 Peak) Output

  6. A50A200 Amplifiers Analog Type Advanced Motion Controls
    A50A200

    40-175 VDC Input, 25 A Cont. (50 Peak) Output

  7. A50A200I Amplifiers Analog Type Advanced Motion Controls
    A50A200I

    40-175 VDC Input, 25 A Cont. (50 Peak), Isolation option

  8. The AB15A100 PWM servo drive is designed to drive brushless and brushed DC motors at a high switching frequency.
    AB15A100

    20-80 VDC Input, 7.5 A Cont. (15 Peak)

    $405.00
  9. The AB20A200 PWM servo drive is designed to drive brushless and brushed DC motors at a high switching frequency.
    AB20A200

    40-175 VDC Input, 12 A Cont. (20 Peak) Output

    $505.00
  10. Loop gain, current limit, input gain, and offset can be adjusted using 4-turn potentiometers
    AB25A100

    20-80 VDC Input, 15 A Cont. (25A Peak) Output

    $430.00
  11. AB30A200 Amplifiers Analog Type Advanced Motion Controls
    AB30A100

    20-85 VDC Input; 15A continuous / 30A peak | 2.5kW Output @ 80 VDC

    $509.00
  12. AB30A200 Amplifiers Analog Type Advanced Motion Controls
    AB30A200

    40-175 VDCput; 15A continuous / 30A peak | 2.5kW Output @ 175 VDC

    $574.00
  13. AB30A200AC Amplifiers Analog Type Advanced Motion Controls
    AB30A200AC

    30-125 VAC (50/60 Hz, 3ph) Input {optionally 40-175 VDC}; 10A continuous / 30A peak

    $966.00
  14. AB30A200I Amplifiers Analog Type Advanced Motion Controls
    AB30A200I

    40-175 VDCput; 15A continuous / 30A peak | 2.5kW Output @ 175 VDC

    $742.00
  15. AB50A100 Amplifiers Analog Type Advanced Motion Controls
    AB50A100

    20-80 VDCput; 25A continuous / 50A peak | 2.0kW Output @ 80 VDC

    $592.00
  16. AB50A200 Amplifiers Analog Type Advanced Motion Controls
    AB50A200

    40-175 VDCput; 25A continuous / 50A peak | 4.2kW Output @ 175 VDC

    $655.00
  17. AB50A200I Amplifiers Analog Type Advanced Motion Controls
    AB50A200I

    40-175 VDCput; 25A continuous / 50A peak | 4.2kW Output @ 175 VDC

    $823.00
  18. This Servo drive features 20-80 VDCput; 6A continuous / 12A peak | 0.5kW Output @ 80 VDC.
    AZ12A8

    20-80 VDCput; 6A continuous / 12A peak | 0.5kW Output @ 80 VDC

  19. AZ12A8DDC Amplifiers Analog Type Advanced Motion Controls
    AZ12A8DDC

    20-80 VDCput; 6A continuous / 12A peak | 0.5kW Output @ 80 VDC

  20. AZ20A8 Amplifiers Analog Type Advanced Motion Controls
    AZ20A8

    10-80 VDCput; 12A continuous / 20A peak | 0.9kW Output @ 80 VDC

  21. AZ20A8DDC Amplifiers Analog Type Advanced Motion Controls
    AZ20A8DDC

    10-80 VDC Input, 12 A Cont. (20 Peak), PWM Command Source

  22. AZ25A20 Amplifiers Analog Type Advanced Motion Controls
    AZ25A20

    40-175 VDC Input, 12.5 A Cont. (25 Peak)

  23. AZ40A8 Amplifiers Analog Type Advanced Motion Controls
    AZ40A8

    10-80 VDC Input, 20 A Cont. (40 Peak)

  24. AZ40A8DDC Amplifiers Analog Type Advanced Motion Controls
    AZ40A8DDC

    10-80 VDC Input, 20 A Cont. (40 Peak), PWM Command Source

  25. AZ60A8 Amplifiers Analog Type Advanced Motion Controls
    AZ60A8

    10-80 VDCput; 30A continuous / 60A peak | 2.3kW Output @ 80 VDC

  26. This servo drive boasts 20-80 VDCput; 3A continuous / 6A peak | 0.2kW Output @ 80 VDC capability.
    AZ6A8

    20-80 VDCput; 3A continuous / 6A peak | 0.2kW Output @ 80 VDC

  27. This PWM servo drive features many capabilities such as 20-80 VDCput; 3A continuous / 6A peak | 0.2kW Output @ 80 VDC.
    AZ6A8DDC

    20-80 VDCput; 3A continuous / 6A peak | 0.2kW Output @ 80 VDC

  28. AZB10A4 Amplifiers Analog Type Advanced Motion Controls
    AZB10A4

    10-36 VDCput; 5A continuous / 10A peak | 0.2 Output @ 36 VDC

    $176.00
  29. AZB10A4IC Amplifiers Analog Type Advanced Motion Controls
    AZB10A4IC

    10-36 VDCput; 5A continuous / 10A peak | 0.2 Output @ 36 VDC

  30. This PWM servo drive offers 20-80 VDCput; 6A continuous / 12A peak | 0.5kW Output @ 80 VDC.
    AZB12A8

    20-80 VDCput; 6A continuous / 12A peak | 0.5kW Output @ 80 VDC

    $231.00

Items 1-30 of 82

Page
per page
Set Descending Direction