Inertia Dynamics Clutches

All Inertia Dynamics clutches are recognized by Underwriters Laboratories to both U.S. and Canadian safety requirements. 

Power-on Clutches are used to couple two parallel shafts. The armature hub assembly is mounted to the same shaft as the rotor assembly.  The armature hub accommodates a pulley, gear, sprocket, etc., to transmit torque to the second shaft. The field assembly is mounted on the shaft and retained by a loose fitting pin or bracket through the anti-rotation tab.

Inertia Dyanmics Clutches We Offer:

shaft mounted clutch from inertia dynamics

Shaft Mounted Clutches — Type SL

SL/BSL series power-on clutches are used to couple two parallel shafts. The armature hub assembly is mounted to the same shaft as the rotor assembly. The armature hub accommodates a pulley, gear, sprocket, etc., to transmit torque to the second shaft. The field assembly is mounted on the shaft and retained by a loose fitting pin or bracket through the anti-rotation tab.

shaft mounted clutch from inertia dynamics

Shaft Mounted Clutches — Type BSL

Inertia Dynamics features five sizes of ball bearing clutches. All sizes have ball bearing armature and field assemblies for heavy-duty applications, allowing higher shaft speeds and side loads to be achieved. All BSL clutches are shaft mounted for easy installation and operate in the same manner as our SL series clutches.

shaft mounted clutch couplings

Shaft Mounted Clutch Couplings — Type SO

SO series power-on clutch couplings are used to couple two in-line shafts. The armature hub assembly is mounted to the load shaft and the rotor assembly is mounted on the input shaft. The field assembly is mounted on the input shaft and retained by a loose-fitting pin or bracket through the anti-rotation tab.

flange mounted clutch from inertia dynamics

Flange Mounted Clutches — Type FL

FL series power-on clutches are used to couple two parallel shafts. The armature hub assembly is mounted to the same shaft as the rotor assembly. The armature hub accommodates a pulley, gear, sprocket, etc., to transmit torque to the second shaft. The field assembly is mounted to a bulkhead that is perpendicular to the input shaft.

flange mounted clutch couplings

Flange Mounted Clutch Couplings — Type FO

FO series power-on clutch couplings are used to couple two in-line shafts. The armature hub assembly is mounted to the load shaft and the rotor assembly is mounted on the input shaft. The field assembly is mounted to a bulkhead that is perpendicular to the shaft.

Have a Question?
Click here to ask one of our experts or call us at 1.877.737.8698