SKU
322765
- Buy 5 for $2,719.00 each and save 5%
- Buy 10 for $2,576.00 each and save 10%
Product Details
The DigiFlex® Performance™ (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications. In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
This DP Series drive features an EtherCAT® interface for network communication using CANopen over EtherCAT (CoE), and a USB port for drive setup and commissioning using DriveWare® 7, available for download at www.a-m-c.com. All drive and motor parameters are stored in nonvolatile memory. The DPE Series Hardware Installation Manual is available for download at www.a-m-c.com.Features
Metric Toggle
Product Category | Amplifiers - Digital Type |
---|---|
Manufacturer | Advanced Motion Controls |
Short Description | 200-240 VAC (50/60 Hz, 3ph) Input {optionally 255-373 VDC}; 30A continuous / 60A peak | 9.7kW Output @ 240 VAC in |
Series | DPC Series,vendor=Advanced Motion Controls |
Communications | CANopen, RS-232 |
Commutation | Sinusoidal |
Drive Architecture | Digital |
Feedback | Hall Effect Sensors, Incremental Encoder |
Max Continuous Output Current (A) | 30 |
Max Input Supply Voltage (VAC) | 240 |
Max Operating Temperature (°C) | 75 |
Max Operating Temperature (°F) | 167 |
Max Peak Output Current (A) | 60 |
Max Rated Power (W) | 9662 |
Min Input Supply Voltage (VAC) | 200 |
Max Input Supply Voltage (VDC) | 373 |
Min Input Supply Voltage (VDC) | 255 |
Number of Axes (Motors) | 1 |
Operating Mode | Interpolated Position Mode, Profile Current, Profile Velocity, Profile Position |
Phase | Three Phase |
Setup | Manual |