DPRAHIE-030A800

DPRAHIE-030A800

SKU
322808
  • Buy 5 for $2,109.00 each and save 5%
  • Buy 10 for $1,998.00 each and save 10%
$2,219.00

For bulk orders request a quote 

Product Details

The DigiFlex® Performance™ (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications. In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.

This DP Series drive features an EtherCAT® interface for network communication using CANopen over EtherCAT (CoE), and a USB port for drive setup and commissioning using DriveWare® 7, available for download at www.a-m-c.com. All drive and motor parameters are stored in nonvolatile memory. The DPE Series Hardware Installation Manual is available for download at www.a-m-c.com.

Features

Metric Toggle
More Information
Product Category Amplifiers - Digital Type
Manufacturer Advanced Motion Controls
Short Description 200-480 VAC (50/60 Hz, 3ph) Input {optionally 255-747 VDC}; 30A continuous / 60A peak | 13.7kW Output @ 480 VAC in
Series DPR Series,vendor=Advanced Motion Controls
Communications RS-485/232 / Modbus RTU
Commutation Sinusoidal,Trapezoidal
Drive Architecture Digital
Feedback Hall Effect Sensors, Incremental Encoder
Max Continuous Output Current (A) 15
Max Input Supply Voltage (VAC) 480
Max Operating Temperature (°C) 75
Max Operating Temperature (°F) 167
Max Peak Output Current (A) 30
Max Rated Power (W) 6840
Min Input Supply Voltage (VAC) 200
Max Input Supply Voltage (VDC) 747
Min Input Supply Voltage (VDC) 255
Number of Axes (Motors) 1
Operating Mode Current, Hall Velocity, Velocity, Position
Phase Three Phase
Setup Manual
200-480 VAC (50/60 Hz, 3ph) Input {optionally 255-747 VDC}; 30A continuous / 60A peak | 13.7kW Output @ 480 VAC in

Sample image only. Product may differ

Product Availability
Custom Order: Ships in 4-6 Weeks. Expedited Delivery Available. Please Inquire.