- Buy 5 for $1,026.00 each and save 5%
- Buy 10 for $972.00 each and save 10%
The DigiFlex® Performance™ (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM.
The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications.
In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
This DP Series drive features a single RS-232/RS-485 interface used for drive configuration and setup.
Drive commissioning is accomplished using DriveWare® 7, available for download at www.a-m-c.com.
Features
Product Category | Amplifiers - Digital Type |
---|---|
Manufacturer | Advanced Motion Controls |
Short Description | 100-240 VAC (50/60 Hz, 1ph) Input {optionally 127-373 VDC}; 7.5A continuous / 15A peak | 2.4kW Output @ 240 VAC in |
Series | DPR Series,vendor=Advanced Motion Controls |
Communications | RS-485/232 / Modbus RTU |
Commutation | Sinusoidal |
Drive Architecture | Digital |
Max Continuous Output Current (A) | 7.5 |
Max Input Supply Voltage (VAC) | 240 |
Max Operating Temperature (°C) | 75 |
Max Operating Temperature (°F) | 167 |
Max Peak Output Current (A) | 15 |
Max Rated Power (W) | 2415 |
Min Input Supply Voltage (VAC) | 100 |
Max Input Supply Voltage (VDC) | 373 |
Min Input Supply Voltage (VDC) | 127 |
Number of Axes (Motors) | 1 |
Operating Mode | Current, Velocity, Position |
Phase | Single Phase |
Setup | Computer Interface |