DPRANIR-C060A400

DPRANIR-C060A400

SKU
322826
$2,272.00

For bulk orders request a quote 

Product Details

The DigiFlex® Performance™ (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications. In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.

This DP Series drive features an EtherCAT® interface for network communication using CANopen over EtherCAT (CoE), and a USB port for drive setup and commissioning using DriveWare® 7, available for download at www.a-m-c.com. All drive and motor parameters are stored in nonvolatile memory. The DPE Series Hardware Installation Manual is available for download at www.a-m-c.com.

Features

Metric Toggle
More Information
Product Category Amplifiers - Digital Type
Manufacturer Advanced Motion Controls
Short Description 200-240 VAC (50/60 Hz, 3ph) Input {optionally 255-373 VDC}; 30A continuous / 60A peak | 9.7kW Output @ 240 VAC in
Series DPR Series,vendor=Advanced Motion Controls
Communications RS-485/232 / Modbus RTU
Commutation Sinusoidal
Drive Architecture Digital
Feedback Hall Effect Sensors, Incremental Encoder
Max Continuous Output Current (A) 30
Max Input Supply Voltage (VAC) 240
Max Operating Temperature (°C) 75
Max Operating Temperature (°F) 167
Max Peak Output Current (A) 60
Max Rated Power (W) 9662
Min Input Supply Voltage (VAC) 200
Max Input Supply Voltage (VDC) 373
Min Input Supply Voltage (VDC) 255
Number of Axes (Motors) 1
Operating Mode Current, Velocity, Position
Phase Three Phase
Setup Manual
200-240 VAC (50/60 Hz, 3ph) Input {optionally 255-373 VDC}; 30A continuous / 60A peak | 9.7kW Output @ 240 VAC in

Sample image only. Product may differ

Product Availability
Custom Order: Ships in 4-6 Weeks. Expedited Delivery Available. Please Inquire.