The DZXRALTE-040L080 digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications. This fully digital drive operates in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM.
The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built- in Motion Engine, an internal motion controller used with distributed motion applications.
In addition to motor control, this drive features dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
Network communication is accomplished using either RS-485/232 or Modbus RTU.
This DZR Series drive features a single serial interface used for drive commissioning via DriveWare® 7, available for download at www.a-m-c.com.
The DZX Hardware Installation Manual is available for download from www.a-m-c.com.
All drive and motor parameters are stored in non-volatile memory.
|Manufacturer||Advanced Motion Controls|
|Product Category||Amplifiers - Ext. Environment|
|Motor System||Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless), Closed Loop Vector|
|Min Operating Temperature (°F)||40|
|Max Operating Temperature (°F)||185|
|Min Operating Temperature (°C)||40|
|Max Operating Temperature (°C)||85|
|Max Input Supply Voltage (VDC)||80|
|Max Continuous Output Current (A)||20|
|Max Peak Output Current (A)||40|
|Max Rated Power (W)||1520|
|Operating Mode||Current, Hall Velocity, Velocity, Position|
|Configuration||PCB Mounted, OEM Module|
|Number of Axes||1|
Sample image only. Product may differ