HT23-552

SKU
315048
  • Buy 5 for $120.00 each and save 2%
$123.00

The HT23-552 two-phase stepper motor is designed for use with the STAC5 and STAC6 series of stepper drives and is suitable for a wide range of motion control applications.

The motor is optimized for use with high bus-voltage drives and comes with an integral 10 ft shielded cable.

The motor is terminated with 8 motor leads plus 1 ground lead making it easy to connect the motor to the drive depending on the drive voltage being used. For 120 VAC applications the motor leads must be connected in parallel. For 220 VAC applications the motor leads must be connected in series.

Note: The HT23-552 step motor supersedes the HT23-548 step motor in 120 VAC applications with the STAC6 stepper drives.

Features

More Information
ManufacturerApplied Motion Products
Gearing TypeMotor Only
Max Current Per Phase (A)1.41
Max Holding Torque (mNm)596.00
Max Holding Torque oz (in)84.40
Max Length (mm)47.10
Max Length (in)1.85
Max Number Of Leads8
Max Operating Temperature (°C)50.00
Max Operating Temperature (°F)122.00
Min Operating Temperature (°C)-20.00
Min Operating Temperature (°F)-4.00
Shaft Diameter (mm)6.35
Shaft Diameter (in)0.25
Motor ConstructionHybrid Stepper
Motor TypeHigh torque
NEMA Frame Size23
Shaft OrientationSingle-ended
Step Angle (°)1.8
NEMA 23 Frame, 596 mNm Holding Torque, 1.8 degrees step angle

Sample image only. Product may differ

Product Availability
Lead times can vary. Please contact us for real-time delivery.