The DMC-3x01x Motion Controller Series is Galil's latest generation single-axis motion controller.
It uses a 32-bit RISC processor to provide higher speed than older models.
Like all Galil controllers, programming the DMC-3x01x is simplified with two-letter, intuitive commands and a full set of software tools for servo tuning and analysis.
The DMC-3x01x Motion Controller Series features:
- Available as a compact card-level or box-level unit
- Connects to a stepper or servo motor amplifier of any power range
- Can be purchased with an internal 800-Watt brushless sine drive or microstepping drive which minimizes space, cost, and wiring
- Operates stand-alone or can be networked to a PC via Ethernet
- Modes of motion include:
- point-to-point positioning
- position tracking
- jogging
- contouring
- electronic gearing
- ecam
Additional Features include:
- Two daisy-chainable Ethernet 100 Base-T ports. One 115kbaud RS232 port
- Ethernet supports multiple masters and slaves. TCP/IP, UDP and Modbus TCP master protocol for communication with I/O devices
- Encoder feedback up to 15 MHz. Quadrature standard. SSI and BiSS encoder option(SER). Sinusoidal Encoder option (DMC-31xxx). Main and auxiliary encoder inputs
- Non-volatile memory for programs, variables, and arrays.
- Concurrent execution of four programs.
- Optically isolated forward and reverse limit inputs and homing inputs
- 8 uncommitted, isolated inputs and 4 isolated outputs
- High speed position latch and output compare
- 2 uncommitted 12bit 0-5V analog inputs (16bit ±10V inputs on DMC-31xxx) and 1 uncommitted analog output
- Standard power input is +/-12V and 5V. Controller available with optional DC-DC converter with 9-48VDC single supply input. (Option for 20-80 VDC).
For more information, visit Galil Ethernet/RS232 Single Axis Motion Controller.
For further information, please contact:
Warren Osak
sales@electromate.com
Toll Free Phone: 877-737-8698
www.electromate.com