Almelo, Netherlands – The rare earths present in the permanent magnets of linear motors are a cost-intensive factor. Against this background, the linear motor specialist Tecnotion expands its product portfolio with a new iron core motor: the TM12 is the third in the TM series, producing the same force as motors containing larger, more expensive magnets.
With the addition of the TM12 even applications which require the force from larger motor series are now covered by this new motor. These applications no longer need wider and therefore more expensive magnet plates.
With the 241mm long coil unit of the TM12, a continuous force of 240N and an ultimate force of 480N can be achieved. In addition, there is the possibility to couple two motors on the magnet track, which increases the available continuous power to 480N. The dimensions of the motor are compact: the total installation height including magnet plate is only 40mm, the width of the magnet plate is only 50mm. Speeds of 10 m/s are possible.
Especially in applications with long strokes that require long magnet tracks the TM12 represents a cost-effective alternative. The potential applications are endless: due to the low cogging one can think of use in industrial printers. But machine tooling or cutting systems are also perfect examples where the TM12 can be used.
For more information, please contact:
Toll Free Phone: 877-737-8698
Toll Free Fax: 877-737-8699
Tags: Tecnotion, Electromate, Linear Motor, Iron Core Linear Motor, TM, TM12