5 minute YouTube Video
Published on Jun 11, 2014
Easy to learn XSEL Programming Software. This short video focuses on Program and Position (Data Table) training.
Input to the program data sheet in the PC software all necessary commands in the “SEL language” (IAI’s original language) that instruct the details and sequence of operations.
2: Position (Data Table)
Determine the positions to move the robot to, and input them to the position data sheet in the PC software as coordinates.
The IAI TTA Multi-Axis Table Top Robot features…
Improved Tabletop Robot for Cell Production Applications, Featuring Significantly Higher Payload, Maximum Speed and Rigidity!
1: Significantly Higher Payload and Maximum Speed
2: Stores More Programs and Positions
The additional of a data recovery function makes sure your original data can be restored should writing to a FLASH drive fail due to a power failure.
3: Three Times As Many I/O Points As Conventional Models
When the standard I/O slot isn’t enough, up to two additional expansion I/O slots can be installed.
Four operating ranges are available to choose from.
The 3-axis specification is available in two types of Z-axis strokes: 100mm and 150mm. You can select a model ideal for the size of your work part. Additional options let you change the Y-axis height and position.
5: Greater Bending Rigidity is Achieved by Integrating the Structure of the Y-axis Base with the Mounting Bracket.
6: Labyrinth Structure to Suppress Intrusion of Foreign Matter into X-axis
The X-axis opening is structured as a labyrinth in order to make it difficult for foreign matter dropping onto the actuator (such as screws, molten metal, dust, etc.) and entering the X-axis. This expands the types of work environment supported.
More information on the TTA Tabletop Robot from Intelligent Actuator can be viewed at-
For more information, please contact:
Toll Free Phone: 877-737-8698
Toll Free Fax: 877-737-8699
Tags: IAI, Intelligent Actuator, Electromate, TT Robot, TTA Robot, Tabletop Robot