Explosion Proof Motors

Explosion Proof Motors

Explosion-proof versions of motors are designed to minimize the risk of explosion, and to contain any internal explosion that may occur without allowing it to propagate to the outside environment.

Every day Kollmorgen pushes the boundaries of motion to deliver optimized solutions that satisfy even the most demanding application requirements in the harshest of environments. This includes helping machine builders effectively meet the often complex and time-consuming requirements for ATEX certification.

The ATEX certification controls which machinery and equipment are allowed in explosive environments. Industries may include but are not limited to mining, oil and natural gas refining and flour mills.

Ask customers a few open questions to see if they're meeting the criteria:

  1. Does the application environment in which your machine will operate have its own effective source of ignition?
  2. Will the motion components in your machine be used in a potentially explosive atmosphere?
  3. Will your machine operate under normal atmospheric conditions?

If the application meets these criteria, with Kollmorgen they have a market leading option to meet the ATEX certification while also being able to leverage the co-engineering and high performance that Kollmorgen is able to provide.

Explosion Proof Servo Motors:

EP-Series-Explosion-Proof

EP Series Explosion-Proof Series

These permanent magnet DC (PMDC) motors are SCR-rated and adhere to NEMA standards. They are available in a variety of DC voltages, from 1/4 to 3/4 HP.

Hazardous-Duty-Synchronous-Motor-Series

Hazardous Duty Synchronous Motor Series

Providing torque up to 1,500 oz-in (1,059 N-cm), these synchronous motors are available in UL Listed versions suitable for use in Class I, Division 1, Group D hazardous locations. Frame sizes are NEMA 42 and 66 (110 mm and 170 mm).

EB-Series

EB Series

Based on the 230 VAC B and M Series, the EB Series provides a high-performance explosion proof servomotor that is UL Listed for use in Class I, Division 1, Group C and D hazardous locations.

MX-Explosion-Proof-Stepper-Series

MX Explosion-proof Stepper Series

MX Series stepper motors meet Class I, Division 1, Group D hazardous location requirements. They are available in NEMA 34 and 42 frame sizes (90 and 110 mm), providing minimum holding torques from 1.27 to 9.82 N-m (180 to 1,390 oz-in).

10 Items

per page
Set Descending Direction
  1. MX111 Explosion Proof Motors Kollmorgen
    MX111

    NEMA 42 Frame Size, 6.00 Nm Holding Torque, 1.8 degrees Step Angle

  2. MX112 Explosion Proof Motors Kollmorgen
    MX112

    NEMA 42 Frame Size, 9.82 Nm Holding Torque, 1.8 degrees Step Angle

  3. MX91-FF-206U Explosion Proof Motors Kollmorgen
    MX91-FF-206U

    NEMA 34 Frame Size, 1.27 Nm Holding Torque, 1.8 degrees Step Angle

  4. MX91-FF-402U Explosion Proof Motors Kollmorgen
    MX91-FF-402U

    NEMA 34 Frame Size, 1.27 Nm Holding Torque, 1.8 degrees Step Angle

  5. MX91-FF-403U Explosion Proof Motors Kollmorgen
    MX91-FF-403U

    NEMA 34 Frame Size, 1.27 Nm Holding Torque, 1.8 degrees Step Angle

  6. MX92-FF-206U Explosion Proof Motors Kollmorgen
    MX92-FF-206U

    NEMA 34 Frame Size, 2.61 Nm Holding Torque, 1.8 degrees Step Angle

  7. MX92-FF-401U Explosion Proof Motors Kollmorgen
    MX92-FF-401U

    NEMA 34 Frame Size, 2.61 Nm Holding Torque, 1.8 degrees Step Angle

  8. MX93-FF-206U Explosion Proof Motors Kollmorgen
    MX93-FF-206U

    NEMA 34 Frame Size, 3.88 Nm Holding Torque, 1.8 degrees Step Angle

  9. MX93-FF-401U Explosion Proof Motors Kollmorgen
    MX93-FF-401U

    NEMA 34 Frame Size, 3.88 Nm Holding Torque, 1.8 degrees Step Angle

  10. MX93-FF-402U Explosion Proof Motors Kollmorgen
    MX93-FF-402U

    NEMA 34 Frame Size, 3.88 Nm Holding Torque, 1.8 degrees Step Angle

10 Items

per page
Set Descending Direction