Integrated Stepper Motors

Integrated Stepper Motors

Integrated Step Motors fuse step motor plus drive and control components into a single device. Integrated steppers offer a space-saving design that reduces wiring and saves on cost over separate motor and drive components.


Applied Motion Products StepSERVO™ Integrated Stepper Motors


Ideally suited for applications such as packaging and labeling, automated test and measurement, automated assembly and life sciences, StepSERVO™ motors from Applied Motion Products provide the next evolution integrated step motor technology. Starting with a proven integrated motor design, we add a high-resolution incremental encoder and closed-loop servo firmware to create a motor that offers the best step motor performance available today. StepSERVO™ motors offer the same high-torque-at-low-speed and excellent holding torque characteristics of open loop stepping motors with the advantages of true closed-loop control. These advantages include the ability to create peak torques from the motor up to 50% higher than the normal torque range of the same step motor running open loop. Closed-loop also means the motor only draws current when it needs it, so step motors now run cooler than ever before. Click on the following link to view a 30minute YouTube Video on the StepSERVO™ integrated stepper motor.

StepSERVO™ integrated stepper motors feature:

  • NEMA frame size 17, 23 and 24. StepSERVO motors utilize 5000 line incremental encoders (20,000 counts/rev)Step Motor with Integrated Driver
  • NEMA frame size 11. StepSERVO motors utilize 1024 line incremental encoders (4,096 counts/rev)
  • Closed-loop servo control using high torque step motors
  • High acceleration for faster machine cycles and greater productivity
  • Energy efficient, cool running
  • All-in-one compact solution
  • IP65 versions for wet and dusty environments
  • Stand-alone operation (stored Q programming)
  • EtherNet/IP industrial networking option
  • CANopen fieldbus option
  • Modbus RTU option for easy PLC/HMI connection

SSM Integrated Steppers 

Integrated Stepper Motors

Features:

  • NEMA 23 frame size motors
  • Ethernet (RJ-45) port for programming
  • EtherNet/IP industrial networking standard
  • Three motor lengths (stack lengths) available to provide the highest amount of torque in the shortest motor possible

SSM Selection ChartView More

Step Motor with Integrated Driver

 


TSM Integrated Steppers 

Features:

amp integrated stepper motor

  • NEMA 11 (New!), NEMA 17 and NEMA 23 frame size motors
  • RS-232 or RS-485 port for programming and streaming commands
  • Control options including CANopen fieldbus control, digital step & direction control, analog velocity mode, streaming commands and stand-alone operation using stored Q programs.
  • Three motor lengths available in each frame size to provide the highest amount of torque for each length

TSM Selection ChartView More

amp integrated step motor chart

 


TXM Integrated Steppers 

integrated stepper motor

Feature:

  • IP65 rated for wet and dusty environments
  • NEMA 24 frame size motors
  • RS-232, RS-485 or Ethernet port (M12) for programming, streaming commands and fieldbus/networking
  • Control options include CANopen fieldbus control, EtherNet/IP industrial networking, digital step & direction control, analog velocity mode, streaming commands and stand-alone operation using stored Q programs.
  • Two motor lengths available to provide both a lower torque and a higher torque option depending on application requirements 

TXM Selection ChartView More

amp integrated step motor chart

amp integrated step motor chart

 


STM Series Integrated Stepper Motors from AMP


Applied Motion Products' STM Series Integrated Stepper Motors, available in NEMA 17, 23, and 24 frame sizes, including Washdown versions, combine the best of Applied Motion's drive and motor offering in a single, integrated device. 

integrated stepper motor with driver

STM Integrated Motors feature:

  • Dynamic Current Control
  • Anti-Resonance
  • Torque Ripple Smoothing
  • Microstep Emulation
  • Choose between RS-232 or RS-485 port for programming and serial communications
  • Optional fieldbus communications
  • Optional built-in incremental encoder provides advanced functionality

STM models feature the following multiple control options: 

  • "S" drives for basic applications such as step & direction or velocity mode
  • "Q" drives for stand-alone Q programming with more I/O and options for encoder feedback, RS-485, and Ethernet UDP & TCP communications
  • "C" drives for use as slave nodes on CANopen networks, with or without encoder feedback
  • "IP" drives for use in EtherNet/IP communication networks, with full Q programming capabilities and optional encoder feedback

STM Selection ChartView More

amp integrated step motor chart


 JVL Industri Elektronik Integrated QuickStep Stepper Motors


MIS QuickStep Stepper Motors from JVL are compact versatile Integrated stepper motors that meet almost any need for a compact stepper motor system.  The force range is from 0.2 to 25Nm in flange size NEMA 17(43mm) to NEMA 43 (110mm).The basic idea in the MIS motors is to minimize the installation costs but also to make a component that is much better protected against electrical noise which can be a typical problem when using long cables between controller and motor. The stepper motor, hall sensor or encoder and electronics are specially developed by JVL so that they together form a closed unit where the power driver and controller is mounted inside the motor in a closed section.

MIS Selection GuideView More

JVL INTEGRATED STEPPER MOTOR FAMILY

JVL Integrated Stepper Motor Family

Items 1-30 of 181

Page
per page
Set Descending Direction
Filter By
  1. SSM23IP-2EG Integrated Motors Applied Motion Products
    SSM23IP-2EG

    Drive + Motor + Control Unit (Ethernet, EtherNet/IP)

  2. SSM23IP-3EG Integrated Motors Applied Motion Products
    SSM23IP-3EG

    Drive + Motor + Control Unit (Ethernet, EtherNet/IP)

  3. SSM23IP-4EG Integrated Motors Applied Motion Products
    SSM23IP-4EG

    Drive + Motor + Control Unit (Ethernet, EtherNet/IP)

  4. SSM23Q-2EG Integrated Motors Applied Motion Products
    SSM23Q-2EG

    Drive + Motor + Control Unit (Ethernet), NEMA 23, 1002 mNm Holding Torque, Intergral Encoder

  5. SSM23Q-3EG Integrated Motors Applied Motion Products
    SSM23Q-3EG

    Drive + Motor + Control Unit (Ethernet), NEMA 23, 1496 mNm Holding Torque, Intergral Encoder

  6. SSM23Q-4EG Integrated Motors Applied Motion Products
    SSM23Q-4EG

    Drive + Motor + Control Unit (Ethernet), NEMA 24, 2400 mNm Holding Torque, Intergral Encoder

  7. STM17C-3CE Integrated Motors Applied Motion Products
    STM17C-3CE

    Drive + Motor + Control Unit (RS232, CANopen)

  8. STM17C-3CN Integrated Motors Applied Motion Products
    STM17C-3CN

    Drive + Motor + Control Unit (RS232, CANopen)

  9. STM17Q-1AE Integrated Motors Applied Motion Products
    STM17Q-1AE

    Drive + Motor + Control Unit (RS232)

  10. STM17Q-1AN Integrated Motors Applied Motion Products
    STM17Q-1AN

    Drive + Motor + Control Unit (RS232)

  11. STM17Q-1RE Integrated Motors Applied Motion Products
    STM17Q-1RE

    Drive + Motor + Control Unit (RS485)

  12. STM17Q-1RN Integrated Motors Applied Motion Products
    STM17Q-1RN

    Drive + Motor + Control Unit (RS485)

  13. STM17Q-2AE Integrated Motors Applied Motion Products
    STM17Q-2AE

    Drive + Motor + Control Unit (RS232)

  14. STM17Q-2AN Integrated Motors Applied Motion Products
    STM17Q-2AN

    Drive + Motor + Control Unit (RS232)

  15. STM17Q-2RE Integrated Motors Applied Motion Products
    STM17Q-2RE

    Drive + Motor + Control Unit (RS485)

  16. STM17Q-2RN Integrated Motors Applied Motion Products
    STM17Q-2RN

    Drive + Motor + Control Unit (RS485)

  17. STM17Q-3AE Integrated Motors Applied Motion Products
    STM17Q-3AE

    Drive + Motor + Control Unit (RS232)

  18. STM17Q-3AN Integrated Motors Applied Motion Products
    STM17Q-3AN

    Drive + Motor + Control Unit (RS232)

  19. STM17Q-3RE Integrated Motors Applied Motion Products
    STM17Q-3RE

    Drive + Motor + Control Unit (RS485)

  20. STM17Q-3RN Integrated Motors Applied Motion Products
    STM17Q-3RN

    Drive + Motor + Control Unit (RS485)

  21. STM17R-3ND Integrated Motors Applied Motion Products
    STM17R-3ND

    Drive + Motor + Control Unit

  22. STM17R-3NE Integrated Motors Applied Motion Products
    STM17R-3NE

    Drive + Motor + Control Unit

  23. STM17R-3NN Integrated Motors Applied Motion Products
    STM17R-3NN

    Drive + Motor + Control Unit

  24. STM17S-1AE Integrated Motors Applied Motion Products
    STM17S-1AE

    Drive + Motor + Control Unit (RS232)

  25. STM17S-1AN Integrated Motors Applied Motion Products
    STM17S-1AN

    Drive + Motor + Control Unit (RS232)

  26. STM17S-1RE Integrated Motors Applied Motion Products
    STM17S-1RE

    Drive + Motor + Control Unit (RS485)

  27. STM17S-1RN Integrated Motors Applied Motion Products
    STM17S-1RN

    Drive + Motor + Control Unit (RS485)

  28. STM17S-2AE Integrated Motors Applied Motion Products
    STM17S-2AE

    Drive + Motor + Control Unit (RS232)

  29. STM17S-2AN Integrated Motors Applied Motion Products
    STM17S-2AN

    Drive + Motor + Control Unit (RS232)

  30. STM17S-2RE Integrated Motors Applied Motion Products
    STM17S-2RE

    Drive + Motor + Control Unit (RS485)

Items 1-30 of 181

Page
per page
Set Descending Direction