Integrated Stepper Motors

Integrated Stepper Motors

Integrated Step Motors fuse step motor plus drive and control components into a single device. Integrated steppers offer a space-saving design that reduces wiring and saves on cost over separate motor and drive components.


Applied Motion Products StepSERVO™ Integrated Stepper Motors


Ideally suited for applications such as packaging and labeling, automated test and measurement, automated assembly and life sciences, StepSERVO™ motors from Applied Motion Products provide the next evolution integrated step motor technology. Starting with a proven integrated motor design, we add a high-resolution incremental encoder and closed-loop servo firmware to create a motor that offers the best step motor performance available today. StepSERVO™ motors offer the same high-torque-at-low-speed and excellent holding torque characteristics of open loop stepping motors with the advantages of true closed-loop control. These advantages include the ability to create peak torques from the motor up to 50% higher than the normal torque range of the same step motor running open loop. Closed-loop also means the motor only draws current when it needs it, so step motors now run cooler than ever before. Click on the following link to view a 30minute YouTube Video on the StepSERVO™ integrated stepper motor.

StepSERVO™ integrated stepper motors feature:

  • NEMA frame size 17, 23 and 24. StepSERVO motors utilize 5000 line incremental encoders (20,000 counts/rev)Step Motor with Integrated Driver
  • NEMA frame size 11. StepSERVO motors utilize 1024 line incremental encoders (4,096 counts/rev)
  • Closed-loop servo control using high torque step motors
  • High acceleration for faster machine cycles and greater productivity
  • Energy efficient, cool running
  • All-in-one compact solution
  • IP65 versions for wet and dusty environments
  • Stand-alone operation (stored Q programming)
  • EtherNet/IP industrial networking option
  • CANopen fieldbus option
  • Modbus RTU option for easy PLC/HMI connection

SSM Integrated Steppers 

Integrated Stepper Motors

Features:

  • NEMA 23 frame size motors
  • Ethernet (RJ-45) port for programming
  • EtherNet/IP industrial networking standard
  • Three motor lengths (stack lengths) available to provide the highest amount of torque in the shortest motor possible

SSM Selection ChartView More

Step Motor with Integrated Driver

 


TSM Integrated Steppers 

Features:

amp integrated stepper motor

  • NEMA 11 (New!), NEMA 17 and NEMA 23 frame size motors
  • RS-232 or RS-485 port for programming and streaming commands
  • Control options including CANopen fieldbus control, digital step & direction control, analog velocity mode, streaming commands and stand-alone operation using stored Q programs.
  • Three motor lengths available in each frame size to provide the highest amount of torque for each length

TSM Selection ChartView More

amp integrated step motor chart

 


TXM Integrated Steppers 

integrated stepper motor

Feature:

  • IP65 rated for wet and dusty environments
  • NEMA 24 frame size motors
  • RS-232, RS-485 or Ethernet port (M12) for programming, streaming commands and fieldbus/networking
  • Control options include CANopen fieldbus control, EtherNet/IP industrial networking, digital step & direction control, analog velocity mode, streaming commands and stand-alone operation using stored Q programs.
  • Two motor lengths available to provide both a lower torque and a higher torque option depending on application requirements 

TXM Selection ChartView More

amp integrated step motor chart

amp integrated step motor chart

 


STM Series Integrated Stepper Motors from AMP


Applied Motion Products' STM Series Integrated Stepper Motors, available in NEMA 17, 23, and 24 frame sizes, including Washdown versions, combine the best of Applied Motion's drive and motor offering in a single, integrated device. 

integrated stepper motor with driver

STM Integrated Motors feature:

  • Dynamic Current Control
  • Anti-Resonance
  • Torque Ripple Smoothing
  • Microstep Emulation
  • Choose between RS-232 or RS-485 port for programming and serial communications
  • Optional fieldbus communications
  • Optional built-in incremental encoder provides advanced functionality

STM models feature the following multiple control options: 

  • "S" drives for basic applications such as step & direction or velocity mode
  • "Q" drives for stand-alone Q programming with more I/O and options for encoder feedback, RS-485, and Ethernet UDP & TCP communications
  • "C" drives for use as slave nodes on CANopen networks, with or without encoder feedback
  • "IP" drives for use in EtherNet/IP communication networks, with full Q programming capabilities and optional encoder feedback

STM Selection ChartView More

amp integrated step motor chart


 JVL Industri Elektronik Integrated QuickStep Stepper Motors


MIS QuickStep Stepper Motors from JVL are compact versatile Integrated stepper motors that meet almost any need for a compact stepper motor system.  The force range is from 0.2 to 25Nm in flange size NEMA 17(43mm) to NEMA 43 (110mm).The basic idea in the MIS motors is to minimize the installation costs but also to make a component that is much better protected against electrical noise which can be a typical problem when using long cables between controller and motor. The stepper motor, hall sensor or encoder and electronics are specially developed by JVL so that they together form a closed unit where the power driver and controller is mounted inside the motor in a closed section.

MIS Selection GuideView More

JVL INTEGRATED STEPPER MOTOR FAMILY

JVL Integrated Stepper Motor Family

Items 121-150 of 193

per page
Set Descending Direction
  1. TSM23C-3CG Integrated Motors Applied Motion Products
    TSM23C-3CG

    Drive + Motor + Control Unit (CANopen)

  2. TSM23C-4CG Integrated Motors Applied Motion Products
    TSM23C-4CG

    Drive + Motor + Control Unit (CANopen)

  3. TSM23P-2AG Integrated Motors Applied Motion Products
    TSM23P-2AG

    Drive + Motor + Control Unit (RS232)

  4. TSM23P-3AG Integrated Motors Applied Motion Products
    TSM23P-3AG

    Drive + Motor + Control Unit (RS232)

  5. TSM23P-4AG Integrated Motors Applied Motion Products
    TSM23P-4AG

    Drive + Motor + Control Unit (RS232)

  6. TSM23Q-2AG Integrated Motors Applied Motion Products
    TSM23Q-2AG

    Drive + Motor + Control Unit (RS232)

  7. TSM23Q-2RG Integrated Motors Applied Motion Products
    TSM23Q-2RG

    Drive + Motor + Control Unit (RS485)

  8. TSM23Q-3AG Integrated Motors Applied Motion Products
    TSM23Q-3AG

    Drive + Motor + Control Unit (RS232)

  9. TSM23Q-3RG Integrated Motors Applied Motion Products
    TSM23Q-3RG

    Drive + Motor + Control Unit (RS485)

  10. TSM23Q-4AG Integrated Motors Applied Motion Products
    TSM23Q-4AG

    Drive + Motor + Control Unit (RS232)

  11. TSM23Q-4RG Integrated Motors Applied Motion Products
    TSM23Q-4RG

    Drive + Motor + Control Unit (RS485)

  12. TSM23S-2AG Integrated Motors Applied Motion Products
    TSM23S-2AG

    Drive + Motor + Control Unit (RS232)

  13. TSM23S-2RG Integrated Motors Applied Motion Products
    TSM23S-2RG

    Drive + Motor + Control Unit (RS485)

  14. TSM23S-3AG Integrated Motors Applied Motion Products
    TSM23S-3AG

    Drive + Motor + Control Unit (RS232)

  15. TSM23S-3RG Integrated Motors Applied Motion Products
    TSM23S-3RG

    Drive + Motor + Control Unit (RS485)

  16. TSM23S-4AG Integrated Motors Applied Motion Products
    TSM23S-4AG

    Drive + Motor + Control Unit (RS232)

  17. TSM23S-4RG Integrated Motors Applied Motion Products
    TSM23S-4RG

    Drive + Motor + Control Unit (RS485)

  18. TSM34C-1CG Integrated Motors Applied Motion Products
    TSM34C-1CG

    Drive + Motor + Control Unit (CANopen), NEMA 34, 2696 mNm Holding Torque, Integral Encoder

  19. TSM34C-3CG Integrated Motors Applied Motion Products
    TSM34C-3CG

    Drive + Motor + Control Unit (CANopen), NEMA 34, 5196 mNm Holding Torque, Integral Encoder

  20. TSM34C-5CG Integrated Motors Applied Motion Products
    TSM34C-5CG

    Drive + Motor + Control Unit (CANopen), NEMA 34, 6700 mNm Holding Torque, Integral Encoder

  21. TSM34C-6CG Integrated Motors Applied Motion Products
    TSM34C-6CG

    Drive + Motor + Control Unit (CANopen), NEMA 34, 8197 mNm Holding Torque, Integral Encoder

  22. TSM34IP-1DG Integrated Motors Applied Motion Products
    TSM34IP-1DG

    Drive + Motor + Control Unit (CANopen), NEMA 34, 2697 mNm Holding Torque, Integral Encoder

  23. TSM34IP-3DG Integrated Motors Applied Motion Products
    TSM34IP-3DG

    Drive + Motor + Control Unit (Ethernet, EtherNet/IP, Ethernet Dual-Port), NEMA 34, 5196 mNm Holding Torque, Integral Encoder

  24. TSM34IP-5DG Integrated Motors Applied Motion Products
    TSM34IP-5DG

    Drive + Motor + Control Unit (Ethernet, EtherNet/IP, Ethernet Dual-Port), NEMA 34, 6700 mNm Holding Torque, Integral Encoder

  25. TSM34IP-6DG Integrated Motors Applied Motion Products
    TSM34IP-6DG

    Drive + Motor + Control Unit (Ethernet, EtherNet/IP, Ethernet Dual-Port), NEMA 34, 8197 mNm Holding Torque, Integral Encoder

  26. TSM34Q-1AG Integrated Motors Applied Motion Products
    TSM34Q-1AG

    Drive + Motor + Control Unit (RS232), NEMA 34, 2696 mNm Holding Torque, Integral Encoder

  27. TSM34Q-1DG Integrated Motors Applied Motion Products
    TSM34Q-1DG

    Drive + Motor + Control Unit (Ethernet), NEMA 34, 2696 mNm Holding Torque, Integral Encoder

  28. TSM34Q-1RG Integrated Motors Applied Motion Products
    TSM34Q-1RG

    Drive + Motor + Control Unit (RS485), NEMA 34, 2696 mNm Holding Torque, Integral Encoder

  29. TSM34Q-3AG Integrated Motors Applied Motion Products
    TSM34Q-3AG

    Drive + Motor + Control Unit (RS232), NEMA 34, 5196 mNm Holding Torque, Integral Encoder

  30. TSM34Q-3DG Integrated Motors Applied Motion Products
    TSM34Q-3DG

    Drive + Motor + Control Unit (Ethernet), NEMA 34, 5196 mNm Holding Torque, Integral Encoder

Items 121-150 of 193

per page
Set Descending Direction