Please be aware we use cookies to make your experience better. A cookie is a piece of data stored on a visitor's hard drive to help us improve your access and identify repeat visitors. Cookies can also enable us to track and target the interests of our users to enhance the experience on our site. Usage of a cookie is in no way linked to any personally identifiable non-public information. Learn more.
STM17Q-1AN
- Buy 5 for $330.00 each and save 3%
The STM17Q-1AN integrated stepper is a drive+motor unit, fusing a NEMA 17 step motor and a sophisticated 2.0 A/phase (peak-of-sine) stepper drive into a single device. Power to the drive, located at the rear of the motor, must be supplied by an external DC supply.
The STM17Q-1AN integrated stepper can operate in all of the same control modes as the S option, plus the ability to run a Q program stored in non-volatile memory. Q programs are created using Applied Motion’s Q Programmer™ software, which provides powerful commands for motion, I/O, conditional processing, multi-tasking, math functions, and more.
All STM17 units are setup and configured using Applied Motion’s ST Configurator™ software.
Each STM17 integrated stepper comes with 3 digital inputs, 1 digital output, and 1 analog input. The digital inputs accept signals of 5-24 VDC and can be used for connecting pulse & direction signals, end-of-travel limit switches, jog switches, quadrature encoder signals, PLC outputs, sensors, or many other signal types. The digital output can be connected to PLC inputs, counters, lights, relays, or other devices. The analog input accepts 0-5 VDC signals and can be used for velocity and position control.
The STM17Q-1AN comes with an RS-232 port for programming and serial communications.
Features
Manufacturer | Applied Motion Products |
---|---|
Communication/Interface | RS-232 |
Max Holding Torque (mNm) | 219.00 |
Max Holding Torque oz (in) | 31.00 |
Max Length (mm) | 93.50 |
Min Operating Temperature (°C) | 0.00 |
Min Operating Temperature (°F) | 32.00 |
Max Operating Temperature (°C) | 85.00 |
Max Operating Temperature (°F) | 185.00 |
Shaft Diameter (mm) | 5.00 |
Shaft Diameter (in) | 0.20 |
Max Input Supply Voltage (VDC) | 48.00 |
Motor Construction | Hybrid Stepper |
NEMA Frame Size | 17 |
Number of Axes | 1 |
Operating Mode | Analog Positioning, Encoder Following, Q Programming, Streaming Commands, Modbus RTU |
Rotor Inertia (kg-m-s²) | 3.84E-06 |
Rotor Inertia (oz-in-s²) | 5.44E-04 |
Setup | Software Setup |
Shaft Orientation | In-line,Single-nded |
Step Angle (°) | 1.8 |
Sample image only. Product may differ