AC Servo Motor & Digital Drive Combo - 750W, 220VAC

  • Buy 10 for $1,608.00 each and save 3%
Product Details

AC servo motor, digital servo drive, and cabling all in one simple package.


High performance brushless AC servo motor. Standard configuration includes high-resolution, incremental encoder feedback. This motor is UL Recognized in the US and Canada, file no. E472271.

Motor Features:

  • Frame Size: 80 mm
  • Continuous Torque: 21.24 in-lb
  • Peak Torque: 61.07 in-lb
  • Rated Voltage: 220 VAC
  • Rated Power: 750 watts
  • Rated Speed: 3000 rpm
  • Peak Speed: 5500 rpm
  • Rated Current: 4.5 A rms
  • Peak Current: 13.5 A rms
  • Torque Constant: 4.8 in-lb/A
  • Voltage Constant: 36.6 V/krpm
  • Armature Resistance: 1.47 Line-to-Line ohms
  • Armature Inductance: 8.2 Line-to-Line mH
  • Motor Length: 5.19 inch
  • Rotor Inertia: 1.26E-02 oz-in-sec2
  • Weight: 5.8 lbs
  • Integral Holding Brake: No
  • Storage Temperature: -20 to 80 °C
  • Operating Temperature: 0 to 40 °C
  • Insulation Class: Class B (130 ºC)
  • Shaft Diameter: 19 mm (0.748 inch)
  • Maximum Radial Load: 60.7 lbs
  • Maximum Thrust Load: 20.2 lbs


The SV200 series digital servo drives offer excellent performance at exceptional value. They provide short settling times of 0 to 2 milliseconds. Auto-tuning enables the system to optimize tuning parameters automatically and greatly reduces setup time. The anti-vibration function reduces and often eliminates vibrations arising from the natural mechanical characteristics of the load.

The SV2B5-Q-DE servo drive is suited for stand-alone operation, utilizing its built-in motion controller. The drive is programmed using the Q Programmer software (included in SVx Servo Suite) which provides powerful commands for motion, I/O, logic, multitasking and more. Motion commands include relative and absolute positioning, homing, jogging, encoder following, analog positioning, segmented moves and more.

The SVX Servo Suite software allows for easy setup and programming of the drive and motor. It has a built-in oscilloscope for testing motion and optimizing motor performance. The SV2B5-Q-DE is UL Recognized (File No. E332730), CE approved, and RoHS compliant.

Drive Features:

  • Supply Voltage: 156-264 VAC
  • Supply Voltage Type: AC
  • Control Modes:
    • Streaming Commands
    • Analog Positioning
    • Encoder Following
    • Q Programming
    • Modbus TCP
  • Output Current, Continuous: 4.5
  • Output Current, Peak: 13.5
  • Communication Ports:
    • Ethernet
    • Ethernet, dual-port
  • Feedback: Halls + Incremental encoder
  • Setup Method: Software setup
  • Digital Inputs: 8 general purpose, 4 high speed
  • Digital Outputs: 6
  • Analog Inputs: 2
  • Dimensions: 6.9 x 2.6 x 5.9 inches
  • Weight: 57.6 oz
  • Operating Temperature Range: 0 to 85 °C
  • Ambient Temperature Range: 0 to 40 °C
  • Ambient Humidity: 20 to 85% RH or less
  • Status LEDs: 5 digit, 7 segment display
  • Circuit Protection:
    • Short circuit
    • Over-voltage
    • Under-voltage
    • Over-temp

3004-300 - Servo Motor Power Cable (for SV200 AC, SVAC3, SV7, and BLuDC drives)

The 3004-300 cable connects the motor power leads of a J Series servo motor to the corresponding connections of the following Applied Motion servo drives:

  • All SV200 series servo drives
  • All SVAC3 series servo drives
  • All SV7 series servo drives
  • All BLuDC4 and BLuDC9 servo drives

3004-304 - Optional 3 meter Servo Feedback Cable (for SV200 drives)

The 3004-304 cable connects the motor power leads of a J Series servo motor to the corresponding connections of an Applied Motion SV200 Series servo drive.

  • Compatible with J Series servo motors and SV200 Series drives
  • AMP plastic connector on motor end
  • SCSI connector on drive end
Ready-to-ship Plug N’ Play Servo Motor & Drive package: 750W, 220VAC

Sample image only. Product may differ

Product Availability
Stocked in small quantities. Please inquire for larger quantities.

Product Videos

More Information


More Information
ManufacturerApplied Motion Products