HT23-548

SKU
315039
  • Buy 5 for $139.00 each and save 3%
$143.00

The HT23-548 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC input versions only) and is suitable for a wide range of motion control applications. The motor comes with an integral 10 ft shielded cable and a preassembled drive connector for easy connection to a STAC6 drive.

When not used with STAC6 drives, the preassembled drive connector can be removed to reveal 8 motor leads plus 1 ground lead. The 8 motor leads can be connected in one of three ways to the step motor drive of your choice: bipolar series (required for STAC6 drives), bipolar parallel, or unipolar.

Note: The HT23-548 step motor has been superseded by the HT23-552 step motor for use in all new applications with STAC6 stepper drives.

Features

More Information
ManufacturerApplied Motion Products
Gearing TypeMotor Only
Max Current Per Phase (A)2.83
Max Holding Torque (mNm)596.00
Max Holding Torque oz (in)84.40
Max Length (mm)43.50
Max Length (in)1.71
Max Number Of Leads8
Max Operating Temperature (°C)50.00
Max Operating Temperature (°F)122.00
Min Operating Temperature (°C)-20.00
Min Operating Temperature (°F)-4.00
Shaft Diameter (mm)6.35
Shaft Diameter (in)0.25
Motor ConstructionHybrid Stepper
Motor TypeHigh torque
NEMA Frame Size23
Shaft OrientationSingle-ended
Step Angle (°)1.8
NEMA 23 Frame, 596 mNm Holding Torque, 1.8 degrees step angle

Sample image only. Product may differ

Product Availability
Lead times can vary. Please contact us for real-time delivery.