Please be aware we use cookies to make your experience better. A cookie is a piece of data stored on a visitor's hard drive to help us improve your access and identify repeat visitors. Cookies can also enable us to track and target the interests of our users to enhance the experience on our site. Usage of a cookie is in no way linked to any personally identifiable non-public information. Learn more.
HT23-549D
- Buy 5 for $146.00 each and save 3%
The HT23-549 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC input versions only) and is suitable for a wide range of motion control applications. The motor comes with an integral 10 ft shielded cable and a preassembled drive connector for easy connection to a STAC6 drive.
When not used with STAC6 drives, the preassembled drive connector can be removed to reveal 8 motor leads plus 1 ground lead. The 8 motor leads can be connected in one of three ways to the step motor drive of your choice: bipolar series (required for STAC6 drives), bipolar parallel, or unipolar.
Note: The HT23-549 step motor has been superseded by the HT23-553 step motor for use in all new applications with STAC6 stepper drives.
Features
Manufacturer | Applied Motion Products |
---|---|
Gearing Type | Motor Only |
Max Current Per Phase (A) | 2.83 |
Max Holding Torque (mNm) | 1,179.00 |
Max Holding Torque oz (in) | 167.00 |
Max Length (mm) | 55.00 |
Max Length (in) | 2.17 |
Max Number Of Leads | 8 |
Max Operating Temperature (°C) | 50.00 |
Max Operating Temperature (°F) | 122.00 |
Min Operating Temperature (°C) | -20.00 |
Min Operating Temperature (°F) | -4.00 |
Shaft Diameter (mm) | 6.35 |
Shaft Diameter (in) | 0.25 |
Motor Construction | Hybrid Stepper |
Motor Type | High torque |
NEMA Frame Size | 23 |
Shaft Orientation | Double-ended |
Step Angle (°) | 1.8 |
Sample image only. Product may differ