Stepper Motors

A stepper motor (sometimes referred to as a step motor or stepping motor) is a motor with windings in the stator and permanent magnets attached to the rotor. It provides fixed mechanical increments of motion; these increments are referred to as steps and are generally specified in degrees. Stepper motors are ideal for applications that require quick positioning over a short distance. This technology allows for the use of an open-loop controller, which simplifies machine design and lowers cost compared to servo motor systems.


How Stepper Motors Work:

A step motor, in conjunction with a stepper drive, rotates in predefined angles proportional to the digital input command (stepper) pulses. A typical full-step system achieves 200 steps per revolution, this equates to 1.8º per full step. The motor’s position can be commanded to move and hold at a step without any position sensor for feedback (an open-loop controller), as long as the motor is sized to the application in terms of torque and speed.

Stepper motors can also make fine incremental moves and do not require a feedback encoder (open Along with excellent low speed/high torque characteristics without gear reduction, stepper motors can also be used to hold loads in a stationary position without creating overheating.


Stepper Motor Advantages

  • Provide acceleration torque equal to running torque and require no maintenance
  • Speed can easily be determined and controlled by remembering speed equals steps per revolution divided by pulse rate.
  • Fast acceleration capability with non-cumulative positioning error

Stepper Motors Disadvantages

  • Loss of synchronization resulting position error
  • Resonance affecting motor smoothness
  • Limited operation at high speeds
  • Running hot
  • Can stall with excessive loads

Stepper Motor We Carry:

AC Synchronous Stepper Motors

With synchronous motor technology, speed is directly proportional to AC input frequency – for example, at 120 Vac, 60 Hz, an AC synchronous motor will turn at 72 rpm. This speed can be varied by varying the frequency, although most applications simply use gearing or a belt- or chain-drive system to achieve the desired load speed.


Integrated Stepper Motors

Fuse step motor plus drive and control components into a single device. Integrated steppers offer a space-saving design that reduces wiring and saves on cost over separate motor and drive components.


NEMA Stepper Motors

A range of hybrid stepper motors with frame sizes from NEMA 8 to NEMA 66. All NEMA stepper motors are available in 4, 6, or 8 lead configurations for bipolar or unipolar operation. In addition to the standard configuration, our NEMA stepper motors can be designed and manufactured according to the special requirements of the customer.


NEMA Hazardous Duty Stepper Motors

Suitable for use in Class 1, Division 1, Group D locations. They are available in NEMA 34 and 42 frame sizes (90 and 110 mm), and provide minimum holding torques from 1.27 to 9.82 N-m (180 to 1390 oz-in). All explosion-proof stepper motors are available in 4, 6 or 8 lead configurations for bipolar or unipolar operation. In addition to the standard configuration, these hazardous location motors can be designed and manufactured according to the special requirements of the customer.


Stepper Gearmotors

Combine some of our most popular 2-phase hybrid 1.8° step angle NEMA 17 and 23 frame motors with offset spur geaheards to create simple but strong gearmotor solutions for applications requiring high torque at low speeds. The gearheads utilize high-strength steel and precision hobbed gears in one-piece clusters, housed inside a high-temperature, molded composite housing.


Stepper Motor Linear Actuators

Use a proprietary manufacturing process, which incorporates engineering thermoplastics in the rotor drive nut and a stainless steel acme lead screw. This allows the linear actuator to be much quieter, more efficient and more durable than the v-thread and bronze nut configuration commonly used in other linear actuators. Motor life is improved more than 10 times over the traditional bronze nut style – and it requires no maintenance and does not affect the cost. 


Tin-Can Motors

Tin-Can Step Motors (also known as Can-Stack Step Motors) are 2-coil permanent magnet motors. When poles are magnetized by electric pulses applied to the coils, they attract the permanent magnet rotor core in reverse polarities, thereby starting rotation.


Washdown Stepper Motors

Washdown & Food Grade Stepper Motors are conventional hybrid step motors which are dust proof and resistant to low pressure water jets. They are ideal for applications in wet factory environments such as the food and beverage industry or outdoor use. Key features include a nickel-plated brass cable gland, sealed laminations, a front shaft contact seal and an optional IP65 rated encoder cover for use with products that require feedback.


Step Motor Applications:

Stepper motors are typically used for holding or positioning applications. In areas like lasers and optics, they are used in precision positioning equipment such as linear actuators, linear stages, rotation stages, and more. They can also be used in:

  • Packaging Machinery
  • Commercial Products (computer printers, slot machines, intelligent lighting, camera lenses)
  • CNC Machines
  • 3D Printers
  • Textile Machines
  • Robotics
  • CNC Milling Machines
  • Printing Presses

Step Motor Products:

Items 31-60 of 1766

per page
Set Descending Direction
  1. 4109Y-51 NEMA Frame Stepper Motors Lin Engineering
    4109Y-51

    NEMA 17 Frame Size, 6 oz-in Holding Torque, 0.9 degrees step angle

  2. 4109Z-51 NEMA Frame Stepper Motors Lin Engineering
    4109Z-51

    NEMA 17 Frame Size, 3 oz-in Holding Torque, 0.9 degrees step angle

  3. 4118C-01 NEMA Frame Stepper Motors Lin Engineering
    4118C-01

    NEMA 17 Frame Size, 115 oz-in Holding Torque, 1.8 degrees step angle

  4. 4118L-07P NEMA Frame Stepper Motors Lin Engineering
    4118L-07P

    NEMA 17 Frame Size, 83 oz-in Holding Torque, 1.8 degrees step angle

  5. 4118L-07S NEMA Frame Stepper Motors Lin Engineering
    4118L-07S

    NEMA 17 Frame Size, 83 oz-in Holding Torque, 1.8 degrees step angle

  6. 4118M-06P NEMA Frame Stepper Motors Lin Engineering
    4118M-06P

    NEMA 17 Frame Size, 63 oz-in Holding Torque, 1.8 degrees step angle

  7. 4118M-06S NEMA Frame Stepper Motors Lin Engineering
    4118M-06S

    NEMA 17 Frame Size, 63 oz-in Holding Torque, 1.8 degrees step angle

  8. 4118S-04P NEMA Frame Stepper Motors Lin Engineering
    4118S-04P

    NEMA 17 Frame Size, 42 oz-in Holding Torque, 1.8 degrees step angle

  9. 4118S-04S NEMA Frame Stepper Motors Lin Engineering
    4118S-04S

    NEMA 17 Frame Size, 42 oz-in Holding Torque, 1.8 degrees step angle

  10. 416-05-04 Lin Engineering 416 Series NEMA Frame Stepper Motors
    416-05-04

    NEMA 16 Frame Size, 6 oz-in Holding Torque, 0.9 degrees step angle

  11. 416-06-05 Lin Engineering 416 Series NEMA Frame Stepper Motors
    416-06-05

    NEMA 16 Frame Size, 7.3 oz-in Holding Torque, 0.9 degrees step angle

  12. 416-07-05 Lin Engineering 416-07 Series NEMA Frame Stepper Motors
    416-07-05

    NEMA 16 Frame Size, 8.4 oz-in Holding Torque, 0.9 degrees step angle

  13. 417-09-03 NEMA Frame Stepper Motors Lin Engineering
    417-09-03

    NEMA 17 Frame Size, 12 oz-in Holding Torque, 0.9 degrees step angle

  14. 417-09-18 NEMA Frame Stepper Motors Lin Engineering
    417-09-18

    NEMA 17 Frame Size, 12 oz-in Holding Torque, 0.9 degrees step angle

  15. 417-11-03 NEMA Frame Stepper Motors Lin Engineering
    417-11-03

    NEMA 17 Frame Size, 16 oz-in Holding Torque, 0.9 degrees step angle

  16. 417-11-18 NEMA Frame Stepper Motors Lin Engineering
    417-11-18

    NEMA 17 Frame Size, 16 oz-in Holding Torque, 0.9 degrees step angle

  17. 417-13-06 NEMA Frame Stepper Motors Lin Engineering
    417-13-06

    NEMA 17 Frame Size, 28.4 oz-in Holding Torque, 0.9 degrees step angle

  18. 417-13-13 NEMA Frame Stepper Motors Lin Engineering
    417-13-13

    NEMA 17 Frame Size, 28.4 oz-in Holding Torque, 0.9 degrees step angle

  19. 417-15-08 NEMA Frame Stepper Motors Lin Engineering
    417-15-08

    NEMA 17 Frame Size, 30 oz-in Holding Torque, 0.9 degrees step angle

  20. 417-15-12 NEMA Frame Stepper Motors Lin Engineering
    417-15-12

    NEMA 17 Frame Size, 30 oz-in Holding Torque, 0.9 degrees step angle

  21. 4209L-01P NEMA Frame Stepper Motors Lin Engineering
    4209L-01P

    NEMA 17 Frame Size, 62 oz-in Holding Torque, 0.9 degrees step angle

  22. 4209L-01S NEMA Frame Stepper Motors Lin Engineering
    4209L-01S

    NEMA 17 Frame Size, 62 oz-in Holding Torque, 0.9 degrees step angle

  23. 4209M-01P NEMA Frame Stepper Motors Lin Engineering
    4209M-01P

    NEMA 17 Frame Size, 51 oz-in Holding Torque, 0.9 degrees step angle

  24. 4209M-01S NEMA Frame Stepper Motors Lin Engineering
    4209M-01S

    NEMA 17 Frame Size, 51 oz-in Holding Torque, 0.9 degrees step angle

  25. 4209S-01P NEMA Frame Stepper Motors Lin Engineering
    4209S-01P

    NEMA 17 Frame Size, 31 oz-in Holding Torque, 0.9 degrees step angle

  26. 4209S-01S NEMA Frame Stepper Motors Lin Engineering
    4209S-01S

    NEMA 17 Frame Size, 31 oz-in Holding Torque, 0.9 degrees step angle

  27. 4418F-01 NEMA Frame Stepper Motors Lin Engineering
    4418F-01

    NEMA 17 Frame Size, 27 oz-in Holding Torque, 1.8 degrees step angle

  28. 4418L-36 Lin Engineering 4418 Series NEMA Frame Stepper Motors
    4418L-36

    NEMA 17 Frame Size, 100 oz-in Holding Torque, 1.8 degrees step angle

  29. 4418M-01 NEMA Frame Stepper Motors Lin Engineering
    4418M-01

    NEMA 17 Frame Size, 71 oz-in Holding Torque, 1.8 degrees step angle

  30. 4418S-01 NEMA Frame Stepper Motors Lin Engineering
    4418S-01

    NEMA 17 Frame Size, 61 oz-in Holding Torque, 1.8 degrees step angle

Items 31-60 of 1766

per page
Set Descending Direction