The DZPANTU-040B080 digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications. This fully digital drive operates in torque, velocity, or position mode and employs Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM.
The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications. In addition to motor control, this drive features dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
DZPANTU-040B080 drives feature an Ethernet interface for network communication using Ethernet POWERLINK, Modbus TCP or Ethernet, and USB connectivity for drive commissioning using DriveWare® 7, available for download at www.a-m-c.com.
All drive and motor parameters are stored in non-volatile memory.
The DZPANTU Series Hardware Installation Manual is available for download at www.a-m-c.com.
|Manufacturer||Advanced Motion Controls|
|Product Category||Amplifiers - Digital Type|
|Communication/Interface||Ethernet / Ethernet POWERLINK / Modbus TCP|
|Feedback||Hall Effect Sensors, Incremental Encoder|
|Max Continuous Output Current (A)||20|
|Max Operating Temperature (°C)||75|
|Max Operating Temperature (°F)||167|
|Max Peak Output Current (A)||40|
|Max Rated Power (W)||1520|
|Max Input Supply Voltage (VDC)||80|
|Number of Axes||1|
|Operating Mode||Current, Velocity, Position|
Sample image only. Product may differ